You are here: Configuring Double-Take Flex > Working with users and user groups > Specifying user and user group properties

Specifying user and user group properties

To specify properties for a user or user group, perform the following steps:

  1. In the left pane of the Double-Take Flex Management Console, right-click the user or user group that you want to configure and select Properties.

The General tab displays pre-populated information about the user or user group.

  1. On the Data Path tab, you can enable a data path target and specify related parameters.

Field

Description

Enable Data Path iSCSI Target

 Select this checkbox to store data on a separate target.

Target

Click Change to select a target for the data. Do not select a target that is being used as a boot volume. You must also be aware if the target that you select has already been selected as the data path target for a different client.

Drive

 Select the drive letter that you want to represent the data path target on the client. Whenever the client boots, user data will be accessible from and saved to this drive.

Portal

These fields are automatically populated when a target is selected.
Target Name
Initiator Name
Description
  1. Click Apply.
  2. Click OK.