Monitoring and controlling GeoCluster jobs

The Double-Take job created by the GeoCluster will be displayed as an Legacy Job on the Manage Jobs page of the Double-Take Console. You will have limited control over the job, including taking and managing snapshots, viewing the job log, initiating mirrors and verifications, setting bandwidth limitations, deleting orphan files, and pausing and resuming the target.

If you delete the job, the GeoCluster Replicated Disk resource will not be deleted. You will have to remove and readd the passive nodes to the resource to re-create the job without impacting production. If you are not worried about impacting production, you can take the resource offline and then bring it back online to re-create the job.

Ideally, you should use the standard Windows cluster tools to monitor the status of the resource. See your cluster documentation for details on monitoring a cluster resource.

You can also use the following information to help you monitor the GeoCluster Replicated Disk resource.

Resolving an online pending GeoCluster Replicated Disk resource

When the GeoCluster Replicated Disk resource is in an online pending state, you are protected from possible data corruption. If you are using Windows 2003, review the description of the GeoCluster Replicated Disk Status resource to see why the GeoCluster Replicated Disk resource is in the online pending state. If you are using Windows 2008 or 2012, you can see the online pending status directly in the description of the GeoCluster Replicated Disk resource. If the pending state were bypassed, the node where you are trying to bring the resource online would have incomplete data, which would then be replicated to the other nodes in the cluster. This state safeguards you from corrupting your data.

There are different options for resolving an online pending state, depending on whether your operating system supports snapshots. Therefore, some of the following options may not be displayed or may be disabled if they are not valid for your configuration.

If you are using Windows 2003, right-click on the online pending resource and select the desired control. The controls are described in the following tables.

If you are using Windows 2008 or 2012, right-click the online pending resource, select Properties, select the Online Pending tab, and click the desired control. The controls are described in the following tables.

Revert
- Windows 2003 menu—Revert to snapshot
- Windows 2008 or 2012 menu—Revert Snapshot
- Description—If you have a snapshot of the target data available, you can revert to that data. If you revert to a snapshot, any data changes made after the snapshot’s specified date and time will be lost. A Double-Take connection will be established to replicate the node’s data (at the snapshot point-in-time) to the other nodes.
Discard queue
- Windows 2003 menu—Discard target queue
- Windows 2008 or 2012 menu—Discard Queue
- Description—If you have data in the target queue, you can discard that data. If you discard the queued data, you will lose the changes associated with that data made on the previously owning node. A Double-Take connection will be established to replicate the node’s data (without the data that was in queue) to the other nodes.
Offline or fail
- Windows 2003 menu—Force Resource Offline
- Windows 2008 or 2012 menu—Fail Resource
- Description—If you are using Windows 2003, you can force the resource offline. If you are using Windows 2008 or 2012, you can fail the resource. In either case, no Double-Take connection will be established.
Verify group
- Windows 2003 menu—Verify Group
- Windows 2008 or 2012 menu—Verify Group
- Description—With this option and snapshot capability, you can test the data on the node before deciding whether to use it. If you select this option, a snapshot of the node’s current Double-Take data will be taken, the disk will come online, but the GeoCluster Replicated Disk resource will not come online, allowing you to check the data. (This means there is no Double-Take connection established at this time.) Once the snapshot is taken, you can test the data on the node to see if it is viable. Make sure you prevent user access while you are verifying the data. Once you have tested the data, you need to right-click on the online pending resource again and accept or reject the data.
Accept data
- Windows 2003 menu—Accept Data
- Windows 2008 or 2012 menu—Accept
- Description—If you accept the data, the current data on the node will be used, and a Double-Take connection will be established to replicate the current node’s data to the other nodes. If any other nodes in the cluster contain more recent data, this node will overwrite that data and it will be lost.
Reject data
- Windows 2003 menu—Reject Data
- Windows 2008 or 2012 menu—Reject
- Description—If you reject the data, the node will be reverted to the snapshot that was taken when you selected the Verify Group option. Any changes made on the node after that snapshot was created will be lost. This option essentially takes you back to where you were, allowing you the opportunity to check other nodes for more recent data.
  
  If you have multiple GeoCluster Replicated Disks in the same group and have selected to reject the data after verifying the group, the rejection processing may take several minutes.

GeoCluster Replicated Disk Status Resource

The function of the GeoCluster Replicated Disk Status resource (also displayed as GRD Status) varies between Windows 2003, 2008, and 2012. In both operating systems, it is automatically created when the first GeoCluster Replicated Disk resource is created in a group. Once the status resource is created, it will exist as long as there is a GeoCluster Replicated Disk resource in the group. When the last GeoCluster Replicated Disk resource in a group is deleted, the status resource will be deleted. Only one status resource is created per group.If the resource is deleted, it will automatically be re-created.

If you are using Windows 2003, the description of the status resource corresponds to various states of your Double-Take data. By reviewing the status descriptions, you can tell at-a-glance the state of your Double-Take data. If you are using Windows 2008 or 2012, these status descriptions are seen directly in the GeoCluster Replicated Disk resource description, rather than the status resource.

For example, you may see the status "The status of all targets is OK." This indicates the data on each target node is in a good state. Another message may be "Target target_name is queuing. Data in queue on target." This indicates the data on the specified target is not up-to-date. Because there is data in queue on the target, that has not been written to disk yet, the target data is out-of-date. Or you may see either of the following status descriptions.

Target target_name is pending. Data integrity not guaranteed.
Target target_name is suspect. Data integrity not guaranteed.

These messages indicate the data on the specified target node is not in a good state. This could be because a mirror is in progress, an operation has been dropped on the target, or another Double-Take processing issue.As long as the status is pending, data integrity cannot be guaranteed on the specified target node. Check the Double-Take logs for more information. See Log files for more details.

The text of the descriptions may vary between Windows 2003, 2008, and 2012.

Another function of the status resource, for all Windows versions, is to keep you from moving the GeoCluster Replicated Disk resource to another node at the wrong time and potentially corrupting your data. If the GeoCluster Replicated Disk resource was moved while the status resource is in a pending or queuing state, the new node would have incomplete data, which would then be replicated to the other nodes in the cluster. This resource safeguards you from corrupting your data. This happens by removing passive nodes as possible owners and discarding any manual changes made to the possible owners list.