You are here: Monitoring tools > Error codes

Error codes

The following table contains error codes that you may see in the various user interfaces or in log files.

 

-1 Unknown error code (generated when a command failed but the failure is not linked to a pre-defined error code)

-101 Invalid parameter was supplied

-102 Command is not a valid or the syntax is incorrect

-103 Double-Take source module is not loaded

-104 No Double-Take source identified

-105 Double-Take target module is not loaded

-106 Connection already established

-107 Connection does not exist

-108 Mirror currently active

-109 Server does not exist or could not be located

-110 Server is not responding

-111 Double-Take is running

-112 Unknown connection error

-113 Mirror already active

-114 Date is invalid - valid format is mm/dd/yy

-115 Time is invalid - valid format is hh:mm

-116 Invalid option supplied

-117 Mirror is not paused

-118 Connection is not paused

-119 Connection does not exist

-120 Connection already connected

-121 Mirror is not running

-122 Job exists

-123 Job does not exist

-124 No job has been selected

-125 Connection is replicating

-126 Connection is not replicating

-127 Job is enabled

-128 Schedule is not defined

-129 Job is changed

-130 Job is in use

-131 No Double-Take target identified

-132 Memory is low

-133 Memory is sufficient

-134 Replication is pending

-135 Invalid option supplied

-136 Job replication rule does not exist

-137 Mirror queue is full

-138 Insufficient security access

-139 Schedule command is invalid

-140 Source path is invalid

-141 Job is not changed

-142 Insufficient source security access

-143 Invalid statistics file

-144 Job not saved

-145 Connection failed

-146 Cleaner option is not enabled

-147 Target mirror capacity high threshold is met

-148 Target mirror capacity low threshold is met

-149 New option applied

-150 Target is restarted

-151 Replication is out of memory

-152 Write access is blocked on the volume

-153 Transmission is paused

-154 Transmission is active

-155 Target does not support the command

-156 Command conversion to accommodate a different Double-Take version has failed

-157 Incompatible source and target Double-Take versions

-158 Incompatible source and target operating system versions

-159 NAS server to non-NAS server is not a supported configuration

-160 Target module is not loaded

-161 Operation or command is not supported

-162 Target is paused

-163 Target is pending

-164 Target is active

-165 Target is retrying operations

-166 Target is no longer retrying operations

-167 Restore required state is unknown

-168 Not a valid failover or cutover source

-169 Failover or cutover login failed

-170 Feature is not supported

-171 Command is not supported

-172 Target queue log file error

-173 Target disk is full

-174 Target disk has sufficient disk space

-175 Error reading from or writing to the queue log file

-176 Memory-based queue is in use

-177 Disk-based queue is in use

-178 Restore is required

-179 ID the driver supplied to the service is invalid

-180 Child path is blocked

-181 Parent path is blocked

-182 Target path blocking is disabled

-183 Connection ID specified is invalid

-184 No command objects are in the queue

-185 Target is discarding operations from the target queue

-186 Target is not discarding operations from the target queue

-187 Schedule is paused

-188 Schedule is resumed

-189 Target state has changed

-190 Target name has changed

-191 Acknowledgement queue has been updated

-201 Monitor name exists

-202 Monitor name does not exist

-203 Monitor configuration exists

-204 Monitor configuration does not exist

-205 Monitor configuration is in use

-206 Monitor configuration is not in use

-207 Source is online

-208 Source is offline

-209 Server is not failed over

-210 Server is failed over

-211 Server is not being monitored

-212 Failback is in progress

-213 IP address placeholders on the target are unavailable

-214 Target NIC was not found

-215 Source module is not loaded

-216 Failed to set the source state

-217 Unable to ping source

-218 Invalid argument

-219 Recovery is busy

-220 Invalid command

-221 Recovery is started

-222 Script failed to start

-223 Script timeout met

-224 No replication timeout met - connection is bad

-225 Invalid path

-226 Kernel module is not loaded

-227 System dump has failed

-228 Response is null

-229 Object stream is not OK

-230 Transactional NTFS (TxF) SavePoints (intermediate rollback points) are not supported

-231 Data overload

-2001 Transform initialization failed

-2002 General transform failure

-2003 Transform volume count

-2004 Transform missing source

-2005 Transform missing target

-2101 Network controller initialization failed

-2102 General network controller failure

-2103 Network controller already started

-2104 No socket on the network controller

-2105 Listen failure on the network controller

-2201 Error communicating with e-mail server

-2202 Error connecting to e-mail server

-2203 E-mail notification is disabled

-2204 E-mail notification is enabled

-2205 E-mail notification requires Internet Explorer version 5.0 and WMI (E-mail notification no longer requires Internet 5.0 or later.)

-2206 E-mail notification requires Internet Explorer version 5.0 (E-mail notification no longer requires Internet Explorer 5.0 or later.)

-2207 Error sending e-mail

-2208 Error sending test e-mail

-2209 WMI error connecting to e-mail server

-2210 E-mail notification requires WMI

-2211 Event Viewer settings for e-mail notification are invalid

-2212 E-mail notification setting is invalid

-2213 E-mail notification address exists

-2214 E-mail notification alert ID is invalid

-2215 E-mail notification format is invalid

-2216 E-mail notification address does not exist

-2217 E-mail notification address notification list is empty

-2218 E-mail warning is not set

-2219 E-mail test warning is not set

-2200 E-mail notification is functioning properly

-2301 Bandwidth limiting time exists

-2302 Bandwidth limiting name exists

-2303 Bandwidth limit not found

-2304 Bandwidth limit day is invalid

-2305 Bandwidth limit label is invalid

-2401 Snapshot module is not loaded

-2402 Error reading the snapshot .dll

-2403 Snapshot not found

-2404 No snapshot connections found

-2405 Snapshot revert completed

-2406 Snapshot revert is in progress

-2501 Full server functionality is disabled

-2502 No full server interface available

-3001 Refused target mode - Small Business Server

-3002 Refused target mode - Double-Take Move

-3003 Refused target mode - Duplicate code

-3004 Refused target mode - Double-Take Cloud

 

Related Topics