|
|
The following table contains error codes that you may see in the various user interfaces or in log files.
-1 Unknown error code (generated when a command failed but the failure is not linked to a pre-defined error code)
-101 Invalid parameter was supplied
-102 Command is not a valid or the syntax is incorrect
-103 Double-Take source module is not loaded
-104 No Double-Take source identified
-105 Double-Take target module is not loaded
-106 Connection already established
-107 Connection does not exist
-108 Mirror currently active
-109 Server does not exist or could not be located
-110 Server is not responding
-111 Double-Take is running
-112 Unknown connection error
-113 Mirror already active
-114 Date is invalid - valid format is mm/dd/yy
-115 Time is invalid - valid format is hh:mm
-116 Invalid option supplied
-117 Mirror is not paused
-118 Connection is not paused
-119 Connection does not exist
-120 Connection already connected
-121 Mirror is not running
-122 Job exists
-123 Job does not exist
-124 No job has been selected
-125 Connection is replicating
-126 Connection is not replicating
-127 Job is enabled
-128 Schedule is not defined
-129 Job is changed
-130 Job is in use
-131 No Double-Take target identified
-132 Memory is low
-133 Memory is sufficient
-134 Replication is pending
-135 Invalid option supplied
-136 Job replication rule does not exist
-137 Mirror queue is full
-138 Insufficient security access
-139 Schedule command is invalid
-140 Source path is invalid
-141 Job is not changed
-142 Insufficient source security access
-143 Invalid statistics file
-144 Job not saved
-145 Connection failed
-146 Cleaner option is not enabled
-147 Target mirror capacity high threshold is met
-148 Target mirror capacity low threshold is met
-149 New option applied
-150 Target is restarted
-151 Replication is out of memory
-152 Write access is blocked on the volume
-153 Transmission is paused
-154 Transmission is active
-155 Target does not support the command
-156 Command conversion to accommodate a different Double-Take version has failed
-157 Incompatible source and target Double-Take versions
-158 Incompatible source and target operating system versions
-159 NAS server to non-NAS server is not a supported configuration
-160 Target module is not loaded
-161 Operation or command is not supported
-162 Target is paused
-163 Target is pending
-164 Target is active
-165 Target is retrying operations
-166 Target is no longer retrying operations
-167 Restore required state is unknown
-168 Not a valid failover source
-169 Failover login failed
-170 Feature is not supported
-171 Command is not supported
-172 Target queue log file error
-173 Target disk is full
-174 Target disk has sufficient disk space
-175 Error reading from or writing to the queue log file
-176 Memory-based queue is in use
-177 Disk-based queue is in use
-178 Restore is required
-179 ID the driver supplied to the service is invalid
-180 Child path is blocked
-181 Parent path is blocked
-182 Target path blocking is disabled
-183 Connection ID specified is invalid
-184 No command objects are in the queue
-185 Target is discarding operations from the target queue
-186 Target is not discarding operations from the target queue
-187 Schedule is paused
-188 Schedule is resumed
-189 Target state has changed
-190 Target name has changed
-191 Acknowledgement queue has been updated
-201 Monitor name exists
-202 Monitor name does not exist
-203 Monitor configuration exists
-204 Monitor configuration does not exist
-205 Monitor configuration is in use
-206 Monitor configuration is not in use
-207 Source is online
-208 Source is offline
-209 Server is not failed over
-210 Server is failed over
-211 Server is not being monitored
-212 Failback is in progress
-213 IP address placeholders on the target are unavailable
-214 Target NIC was not found
-215 Source module is not loaded
-216 Failed to set the source state
-217 Unable to ping source
-218 Invalid argument
-219 Recovery is busy
-220 Invalid command
-221 Recovery is started
-222 Script failed to start
-223 Script timeout met
-224 No replication timeout met - connection is bad
-225 Invalid path
-226 Kernel module is not loaded
-227 System dump has failed
-228 Response is null
-229 Object stream is not OK
-230 Transactional NTFS (TxF) SavePoints (intermediate rollback points) are not supported
-231 Data overload
-2001 Transform initialization failed
-2002 General transform failure
-2003 Transform volume count
-2004 Transform missing source
-2005 Transform missing target
-2101 Network controller initialization failed
-2102 General network controller failure
-2103 Network controller already started
-2104 No socket on the network controller
-2105 Listen failure on the network controller
-2201 Error communicating with e-mail server
-2202 Error connecting to e-mail server
-2203 E-mail notification is disabled
-2204 E-mail notification is enabled
-2205 E-mail notification requires Internet Explorer version 5.0 and WMI
-2206 E-mail notification requires Internet Explorer version 5.0 (E-mail notification no longer requires Internet Explorer 5.0 or later. If you receive this error, contact CustomerCare.)
-2207 Error sending e-mail
-2208 Error sending test e-mail
-2209 WMI error connecting to e-mail server
-2210 E-mail notification requires WMI
-2211 Event Viewer settings for e-mail notification are invalid
-2212 E-mail notification setting is invalid
-2213 E-mail notification address exists
-2214 E-mail notification alert ID is invalid
-2215 E-mail notification format is invalid
-2216 E-mail notification address does not exist
-2217 E-mail notification address notification list is empty
-2218 E-mail warning is not set
-2219 E-mail test warning is not set
-2200 E-mail notification is functioning properly
-2301 Bandwidth limiting time exists
-2302 Bandwidth limiting name exists
-2303 Bandwidth limit not found
-2304 Bandwidth limit day is invalid
-2305 Bandwidth limit label is invalid
-2401 Snapshot module is not loaded
-2402 Error reading the snapshot .dll
-2403 Snapshot not found
-2404 No snapshot connections found
-2405 Snapshot revert completed
-2406 Snapshot revert is in progress
-2501 Full-server functionality is disabled
-2502 No full-server interface available
-2601 There is no archiving
-2602 There is no recalling
-2603 Target archiving link error
-2604 Target archiving file error
-2605 Target unarchiving file error
-2606 Target file opened by the service
-2607 Target file is already archived
-2608 Target and source file size mismatch
-2609 Target and source file time mismatch
-2610 Target file not found
-2611 Target file attributes can not be archived
-3001 Refused target mode - Small Business Server
-3002 Refused target mode - Double-Take Move
-3003 Refused target mode - Duplicate code
-3004 Refused target mode - Double-Take Cloud