Open topic with navigation
Monitoring application jobs
After you have enabled application protection, you can monitor the protection from the Application Manager Monitor tab.
Protection Status
- Unprotected—No connection exists
- Warning—A connection exists but has issues
- Protected—A connection exists and is active
- Synchronizing—Mirroring is in progress
- Unknown—The protection status could not be determined
- Failing over—Failover from the source to the target is in progress
- Failed over—Failover is complete and the target has assumed the source role
- Failing back—Failback from the target to the original source is in progress
- Restoring—Mirroring (target to source) is in progress
Monitoring Status
- Disabled—Monitoring is disabled
- Enabled—Monitoring is active
- Failover condition met—The source server is unavailable
- Failing over—Failover from the source to the target is in progress
- Failed over—Failover is complete and the target has assumed the source role
- Failing back—Failback from the target to the original source is in progress
Mirror Status
- Calculating—The amount of data to be mirrored is being calculated
- Idle—Data is not being mirrored to the target machine
- Mirroring—Data is being mirrored to the target machine
- Paused—Mirroring has been paused
- Removing Orphans—Double-Take Availability is checking for orphan files within the target path location (files that exist on the target but not on the source). These files will be removed.
- Verifying—Data is being verified
- Restoring—Data is being restored from the target to the source
- Unknown—The mirror status could not be determined
Mirror Remaining
The percentage of the mirror remaining
Replication Status
- Replicating—Data is being replicated to the target machine
- Ready—There is no data to replicate to the target machine
- Stopped—Replication has stopped
- Out of Memory—Kernel memory has been exhausted
Transmit Mode
- Started—Data is being transferred to the target machine
- Paused—Data transmission has been paused
- Stopped—Data is not being transferred to the target machine.
- Error—There is a transmission error.
Target State
- Online—The target is active and online
- Mirroring—The target is in the middle of a mirror process. The data will not be in a good state until the mirror is complete.
- Mirroring stopped—The mirroring process has been stopped
- Remirror required—The data on the target is not in a good state because a remirror is required. This may be caused by an incomplete or stopped mirror or an operation may have been dropped on the target.
- Retrying—The target machine is retrying operations
- Paused—The target machine has been paused
- Pausing—The connection is pausing
- Restore required—The data on the source and target do not match because of a failover condition. Restore the data from the target back to the source. If you want to discard the changes on the target, you can remirror to resynchronize the source and target.
- Replicating—Data is being replicated to the target
- Snapshot reverted—The data on the source and target do not match because a snapshot has been applied on the target. Restore the data from the target back to the source. If you want to discard the changes on the target, you can remirror to resynchronize the source and target.
- Target path blocked—Target path blocking is enabled
- Target path unblocked—Target path blocking is disabled
- Unknown—The state could not be determined
Connected Since
The date and time indicating when the current connection was made
Transmitted
The amount of data transmitted from the source to the target
Compressed
The amount of compressed data transmitted from the source to the target
Source Queue
The amount of data in queue on the source
Target Queue
The amount of data in queue on the target