You are here: Scripting commands > Schedule Window

Schedule Window

Command SCHEDULE WINDOW
Description Sets criteria to only allow transmissions during a certain period of time
Syntax SCHEDule <target> WINDOW <hh:mm> TO <hh:mm>
Options
  • target—Name of the target, an IP address on the target, or a virtual IP address Depending on the network route Double-Take Availability uses to access the target, you may need to specify the fully qualified domain name.
  • hh:mm—Time in hour:minute format using the 24-hour clock. The first time is when the transmission will begin and the second time is when the transmission will end.
Examples
  • schedule beta window 23:00 to 06:00
  • sche beta window 20:00 to 4:00
Notes
  • Establishing a transmission window by itself is not sufficient to start a transmission. You will need to specify a start criteria.
  • Target names that contain non-alphanumeric characters must be enclosed in quotation marks.